Sublimation Print Cost Calculator: How to work it out and price it
Sublimation cost per print is the blank plus the ink and paper used for one transfer. For an 11 oz mug printed on a converted Epson EcoTank with aftermarket ink, that comes to about $2.66 before labor.
Use this sublimation cost calculator to get your own number and a selling price at the margin you want.
Sublimation print cost calculator
Enter what your blank, paper and ink cost, and the cost per item shows up here.
Design Nexus newsletter
Selling sublimation prints?
Get pricing tips, templates and new calculators for sublimation sellers as soon as they are out.
How the cost is worked out
Ink: the price of your ink set divided by the full-color sheets it prints gives the ink for one fully covered sheet. A print uses its share of that, by its size on the sheet and how much of it is covered with ink.
Paper: the calculator lays your print out on the sheet. If two mug wraps fit on one sheet, each print pays for half a sheet.
The waste allowance covers misprints, ghosting and test prints. The price at a margin is the cost divided by one minus the margin, before any platform fees: add those in the Etsy pricing calculator.
Not sure how far your ink goes? Mark the levels in the tanks, print 10 full-color sheets, and see how much is gone.
Sublimation prints per sheet
| Letter, 8.5 × 11 in | A4, 21 × 29.7 cm | Tabloid, 11 × 17 in | 13 × 19 in | |
|---|---|---|---|---|
| 11 oz mug wrap | 3 | 2 | 4 | 6 |
| 15 oz mug wrap | 2 | 2 | 4 | 6 |
| 20 oz skinny tumbler | 1 | 1 | 2 | 2 |
| T-shirt front, about 10 × 12 in | Too big | Too big | 1 | 1 |
| Mouse pad, about 9 × 7.5 in | 1 | 1 | 2 | 2 |
| Coaster, about 4 × 4 in | 4 | 4 | 8 | 12 |
With 0.25 in between prints, both ways round. Printers can't print to the very edge of some papers, so check your printer's margins.
Key takeaways
- An 11 oz mug with a full wrap costs about $2.66 in materials when you buy blanks by the case. About 77% of that is the blank and its shipping.
- Ink is usually the cheapest line. A full mug wrap uses roughly 1 to 2 ml, which costs $0.23 to $0.45 with a $89.99 set of four 100 ml bottles.
- Ink cost per ml differs by about 11x between setups: around $2.48/ml for 31 ml Sawgrass-type cartridges versus about $0.23/ml for bulk EcoTank sublimation ink.
- A 60% margin and a 60% markup give different prices. On a $2.66 mug, a 60% margin means $6.64, while a 60% markup gives only $4.25.
- Labor often costs more than ink and paper combined. Ten minutes at $18/hr adds $3.00 per mug.
- Rerun the numbers whenever you buy a new case of blanks or a new ink set, because the blank price drives most of the total.
What sublimation cost per print includes
Sublimation cost per print is the material cost of one finished item: the ink for the transfer, the sheet (or share of a sheet) of sublimation paper, and the blank. Add labor, packaging and selling fees on top, then divide by (1 − your target margin) to get a price that keeps that margin after costs.
How to calculate sublimation cost per print
You need five numbers, in this order. The calculator does the math, but knowing where each input comes from stops you from plugging in the wrong one.
- Ink cost per ml. Divide the price of your ink set by its total volume. A 4 x 100 ml set at $89.99 works out to $89.99 ÷ 400 ml = $0.225/ml.
- Ink per print. Estimate how many ml one design uses. A full 11 oz mug wrap is usually put at 1 to 2 ml. A small logo uses far less than a full wrap.
- Paper per print. Divide the pack price by the sheet count. If two designs fit on one 8.5 x 11 in (22 x 28 cm) sheet, halve it.
- Blank cost. Divide the case price by the number of units, then add the case shipping divided the same way.
- Price at your margin. Selling price = total cost ÷ (1 − margin). For a 60% margin, divide by 0.4.
Worked example: an 11 oz mug
This example prints a full wrap on an 11 oz ceramic mug with a converted EcoTank and aftermarket sublimation ink, using blanks bought by the case.
| Cost line | Input | Cost per mug (USD) |
|---|---|---|
| Ink | $89.99 for 400 ml, 2 ml per wrap | $0.45 |
| Paper | $0.15 per sheet, 1 sheet [VERIFY] | $0.15 |
| Blank | $57 per case of 36 | $1.58 |
| Blank shipping | $17 per case of 36 | $0.47 |
| Total materials | $2.66 |
Ink is about 17% of the material cost here. The blank and its shipping make up about 77%, so a cheaper case of mugs saves you more than switching ink brands. If the design covers only half the wrap, ink drops to roughly $0.23 and the mug costs about $2.43.
Ink cost per ml by setup
Your printer changes ink cost per ml more than any other choice you make.
| Ink option | Pack size (ml) | Price (USD) | Cost per ml (USD) | Last checked |
|---|---|---|---|---|
| Sawgrass SubliJet-UHD or Siser EasySubli cartridge | 31 | from $77 | $2.48 | Nov 2026 |
| Epson T49M (SureColor F170/F570) | 140 | $44 | $0.31 | Nov 2026 |
| EcoTank sublimation ink set, 4 x 100 ml | 400 | $89.99 | $0.23 | Nov 2026 |
Sawgrass printers run a thick gel ink and may put down less per print than a converted EcoTank, so the per-ml price doesn’t carry straight over to cost per mug.
The extra money buys a closed color system, so you spend less time fiddling with ICC profiles.
Turning cost into a price: margin vs markup
Margin is profit as a share of the selling price. Markup is profit as a share of cost. Mix them up and every item ends up underpriced: a 60% markup on a $2.66 mug gives $4.25, which is only a 37.5% margin.
| Scenario | Cost per mug (USD) | Price at 50% margin | Price at 60% margin | Price at 70% margin |
|---|---|---|---|---|
| Materials only | $2.66 | $5.31 | $6.64 | $8.85 |
| Materials + 10 min labor at $18/hr | $5.66 | $11.31 | $14.14 | $18.85 |
The labor figure comes from Joto’s mug breakdown, which also counts heat tape and packaging. If you sell on Etsy, take its fees out of the selling price before you check your margin.
The second row is the one to price from. Sellers who quote off the first row are working for free.
Common mistakes
- Trusting the printer’s advertised page yield. EcoTank yields are measured on printed document pages and change with coverage and settings, so a 7,500-page figure tells you nothing about mugs.
- Leaving out blank shipping. In the example above it adds $0.47 to every mug.
- Pricing on markup when you meant margin.
- Ignoring misprints. If 1 in 20 mugs goes in the bin, add 5% to your material cost.
- Keeping an old blank price in your notes after the supplier raises it.
Which setup fits you
If you sell a few mugs a month on the side, a converted EcoTank keeps ink under $0.50 per mug, and your savings come from buying blanks in bulk.
If you run steady orders and want the same color every time without building your own profiles, a Sawgrass-type system costs more per ml but takes the guesswork out of color.
If you make full-coverage shirts or larger items, ink per print climbs (a full-coverage shirt is often put at 4 to 6 ml), so cheap bulk ink matters more there than it does on mugs.
If you do custom one-offs, charge for design time as its own line. The material cost stays the same from order to order, while your hours don’t.
Supplies that change your cost
As an Amazon Associate, NechEmpire earns from qualifying purchases.
A-SUB sublimation paper, 8.5 x 11 in, 110 sheets. A common default for converted EcoTanks, and the pack size makes the per-sheet price easy to work out.
11 oz sublimation mug blanks, case of 36. Buying by the case is what gets the blank under $2 in the example.
Sublimation ink set, 4 x 100 ml. Made for converted Epson printers.
FAQ
How much does sublimation ink cost per print?
For an 11 oz mug, ink usually costs $0.23 to $0.45 with bulk EcoTank ink at about $0.23/ml and 1 to 2 ml per wrap. Cartridge systems cost more per ml, so run your own setup through a cost calculator.
What is the average cost to make a sublimation mug?
With an 11 oz blank bought at $57 per case of 36, plus shipping, ink and paper, materials come to about $2.66. Add labor, packaging and fees to get your full cost.
How do I price sublimation products for profit?
Add up the blank, ink, paper, labor and fees, then divide by (1 − your margin). At a 60% margin, a mug that costs $5.66 with labor should sell for about $14.14.
Is margin the same as markup in sublimation pricing?
No. Margin is profit divided by price, and markup is profit divided by cost. A 60% markup on a $2.66 mug gives $4.25, which is a 37.5% margin.
How many ml of sublimation ink does a mug use?
A full 11 oz mug wrap is commonly estimated at 1 to 2 ml on a converted inkjet. Weighing your ink before and after a batch of prints gives you an exact figure.
Is Sawgrass ink more expensive than EcoTank sublimation ink?
Per ml, yes. A 31 ml Sawgrass-type cartridge from $77 works out to about $2.48/ml, against about $0.23/ml for a 400 ml EcoTank set at $89.99.
How often should I recalculate my sublimation costs?
Recalculate each time you buy a new case of blanks or a new ink set. The blank is the biggest cost, so a supplier price change moves your margin more than anything else.
